We go big with a custom turbo system from JPC Racing, Turbonetics, Turbosmart, and Heatshield Product, as Wild E Coyote takes one step closer to making big horsepower numbers on the dyno.
by Don Creason on November 1, 2013
by Barry Kluczyk on October 24, 2013
We go behind the scenes with VMP Tuning and ROUSH to take a look at VMP’s supercharger upgrade for 2005-2010 ROUSHcharged vehicles. As well as the inner workings of their TVS Supercharger and how it’s manufactured.
by Don Creason on September 19, 2013
We install Edelbrock’s E-Force Stage 2 supercharger system for 2011+ Mustangs and put it to the test on the dyno and at the drag strip.
by Barry Kluczyk on August 15, 2013
It’s not everyday that you get the chance to experience a tour of OE level proving grounds and R&D, so when we had the opportunity to tour the Eaton facility we jumped on it! Check out how Eaton puts their superchar
Follow along as Kevin Van Noy of Carburetor Solutions Unlimited modifies a carburetor into a blow-through style carburetor that will perform as necessary for a supercharged combination.
by Jason Reiss on July 15, 2013
Follow along as we install one of ROUSH Performance’s 575-horsepower TVS Stage 1 supercharger systems, their axle-back exhaust, and then the Stage 2 cold-air induction kit that nets 625 horsepower on our 2013 Mustan
by Clifton Klaverweiden on July 13, 2013
When it comes to horsepower-per-dollar values for your muscle car, it’s downright impossible to beat a good nitrous system. Follow along as we install one of NOS’s budget-friendly Powershot 125 carb nitrous systems on a 408ci small block Challenger, and test the horsepower gains on our in-house Dynojet.
by Jason Reiss on July 5, 2013
The centrifugal supercharger has powered many champions to the winner’s circle over the last couple of decades. Check inside to take a walk down memory lane and recall some of the amazing feats a centrifugal blower has been a part of in its drag racing history.
by Jason Reiss on June 13, 2013
Project BlownZ gets a power upgrade in the form of a brand-spankin’-new ProCharger F-1X supercharger. We spoke with ProCharger’s Sergio Schifman, who was happy to detail some of the performance advantages of this new piece. Testing and race results inside!
ProCharger is about to unleash their new i-1 supercharger that promises to completely change the way we think about centrifugal boost.
You’d be hard-pressed to find a company with more options for adding nitrous to an LS engine than Nitrous Express, or simply NX as it’s known to their fans. Founded in 1996, and still owned and operated by Mike Wood, the company takes great pride in the quality, engineering, safety, and power of their systems.
by Andrew Wolf on February 26, 2013
We’ve connected with Turbosmart USA to help us guide you to a better understanding of how blowoff valves and wastegates work and how they’re properly sized for a given application, engine combination, etc.
by Andrew Wolf on January 7, 2013
Chris Alston’s Chassisworks has helped lead the charge in hardcore supercharging accessories with the development of the Component Drive System, a supercharger belt and gear drive setup that also features a host of innovative accessory drives. Join us as we review the CDS system on our Project BlownZ Camaro.
by Rick Seitz on January 7, 2013
We finally have our Chiseled Performance intercooler and water tank installed into our BlownZ Camaro project car, and we are happy with the results to say the least. Check out this latest installment of our ongoing build to learn more!
by Sean Haggai on December 6, 2012
Curious to know whether or not your current LS-based engine needs a vacuum pump? We put one to the test; installing a GZ Motorsports Sportsman vacuum pump on a big-inch 454ci. LSx. What did the dyno numbers reveal? Read on to find out, right here!
by Jason Reiss on October 23, 2012
An overview of the refinements made to ProCharger’s F-Series Superchargers, from the vaunted new F-1X to the monster F-3R, with racing history and excerpts from ProCharger-powered racers.
by Andrew Wolf on September 20, 2012
In this tech piece, we’ll take a look at the feature-filled Schoneck Composites supercharger reverse drive system that we’ll be using on our Project BlownZ, along with a look into the ProCharger F-1R blower and other F-1 series superchargers.
by Clifton Klaverweiden on May 2, 2012
Edelbrock’s E-Force supercharger kit for the C6 made it easy for late-model Corvette owners to add a little boost to their naturally-aspirated Y-bodies. Now, the tuning experts at Lingenfelter have taken that hardware and adapted it for the C5, turning these inexpensive Corvettes into blown street terrors.
The innovative team at Accessible Technologies Inc., the name behind the ProCharger supercharger brand, opened their doors to the powerTV team, allowing us a virtually all-access look inside the design, manufacturing, and assembly process that goes into their self-contained supercharger systems.
Get up to date news & articles directly in your inbox from Street Legal TV!
We will never share your email address
by Jason Reiss on March 19, 2012
We installed the e-Boost Street into our Mustang with a minimum of muss and fuss by following the excellent directions provided by Turbosmart USA. Additionally, we previewed their more powerful E-Boost 2 boost controller.