I will be testing at Milan Drag Strip on May 9th 2008. I will post some new videos of my car. I launch at 6,600 -7,300 and shift at 8,800-9,400
top end rpm is 8,800 -9,000. From my point of view, BES SBC 408 2.21 per cubic inch you do the math of my HP and what my ET will be. I just put a three speed Coan Trans in the car 2.20,1.41 and 1to1. 12 bolt with a 4.88 Pro Gear. I am using a 7,300 PTC I might need to go with a higher stall if needed.
