Hemi 4 speed Pro Shifted the transmission is at Liberty's gears are getting "Cryogenic Processing" to increase torque by 150 pounds
http://www.libertysgears.com/services.htm
Hurst shifter is in very good condition
http://www.hurst-shifters.com/catalo...ers/V-gate.pdf
Clutch and pressure plate also included
Bell housings recertification label is needed to drag race at the track
Set up for SBC or BBC
Chevy input shaft want a Chrysler change the input shaft
Fresh from liberty with all paper work
Darrel did the work on the trans
1964 - 1970 B/RB engine 2.66:1 - 1.91:1 - 1.39:1 - 1:1 = (The "close ratio" V8 gearbox)
Hurst shifters
18-spline unit and a larger input bearing was used to accept the additional torque
P/G w Brake 1.76 HD clutches Gary Role built trans
CSI Carbon fiber shield
Hurst shifter
Trans cooler w/braided steel lines
1.96 super set new in box w/paper work for P/G cost 1295.00 will sell for 850.00
PTC Con 5,800 6,100 P/G spine trans brake used in my car very good condition (no junk) part number on the conv 650.00
400 crank turned to 383 in plastic bag from machine shop 300.00
1150 Dominator good condition 400.00