Project Nova Update: Plan for 2009

It’s been a bit since anything has been said on our Project Swinger Nova, so today I am going to show you where we stand on the project. First off, the Nova sits comfortably under the dyno lift, naked in bare metal and castors welded to the bottom. We push her around the shop when we need to shoot, as Grandma is occupying the lift, since she is getting a full hip replacement with the 25.5 chassis and mini tubs being fabricated in by Mike Ryan.

We’ve been finishing up the full Air Ride suspension, we mounted up the Currie 9-inch rear end, and the SSBC brakes, and now we’re waiting for a full LS3 engine mount/swap conversion kit from BRP Hot Rods. Shawn is really dialing us in with everything we need for the Nova swap.

Here’s a few updates on some of the work we’ve done that you will see shortly.

Air Ride Suspension

The Air Ride suspension is installed minus the tank and electronics; all the actual suspension parts are installed. When most people think of air bags, they think of a mini truck bouncing down the street and something that doesn’t handle good, which is quite the opposite on the Air Ride suspension.

The Air Ride is completely compression and rebound adjustable that uses leveling sensors and air pressure sensors to make sure everything is working right, though it does use an air tank and compressor like your next-door neighbor’s ’64 Impala on 120 spoke Daytons. With a few clicks of the digital screen, it drops the car to the desired location. The suspension kit included all-new front arms to go with the air bags as well as a custom rear mount to hold the back end components in place. Check out the picture below for the rear shocks as well.

Currie Rear End

The Currie 9-inch rear end sits firmly, bolted to the Air ride suspension and with the SSBC brakes installed, ready for a driveshaft that will have to wait until after the motor and transmission is in. The Currie rear end is a Ford 9-inch that features a 3.70 rear gear that is housed to a TrueTrac differential that will allow for proper torque bias to the rear wheels in the turns (since this is an autocross car). The casing is nodular with 31 spline, 4×4.75 lug spaced axles.

The Currie rear end was a direct bolt-in for the stock 10-bolt and we had nothing but joy working with it.

Stainless Steel Brakes

Let’s be honest, four-wheel drums are just stupid; they do nothing for performance, unless you are having brake tests against a semi truck. The complete FX3 disc brake kit is fully installed on the Nova. The front calipers feature three 38 MM pistons in an aluminum housing. The front rotors are 13” and are cross-drilled and slotted to accommodate our 5×4.75 spacing.

The rears are slightly smaller with three, 30 MM rear pistons and a 13” rotor. Again, these rotors bolted up perfectly to our Currie rear end housing in which we now have a solid foundation for braking power on the Nova.

What is Coming Next?

We still have our LS3 engine sitting back here; eager to be ran in the Nova. But before we do that, we will mock up the engine, transmission, and Forgeline wheels. Once everything is mounted like we want it, everything we just installed will be ripped out and the shell will be taken to be painted.

Once any of that takes place, we will have an update for you!

About the author

Mark Gearhart

In 1995 Mark started photographing drag races at his once local track, Bradenton Motorsports Park. He became hooked and shot virtually every series at the track until 2007 until he moved to California and began working as a writer for Power Automedia. He was the founding editor for its first online magazines, and transitioned into the role of editorial director role in 2014. Retiring from the company in 2016, Mark continues to expand his career as a car builder, automotive enthusiast, and freelance journalist to provide featured content and technical expertise.
Read My Articles

Hot Rods and Muscle Cars in your inbox.

Build your own custom newsletter with the content you love from Street Muscle, directly to your inbox, absolutely FREE!

Free WordPress Themes
Street Muscle NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Street Muscle - The Ultimate Muscle Car Magazine

streetmusclemag

We'll send you the most interesting Street Muscle articles, news, car features, and videos every week.

Street Muscle - The Ultimate Muscle Car Magazine

Street Muscle NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Street Muscle - The Ultimate Muscle Car Magazine

streetmusclemag

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


fordmuscle
Classic Ford Performance
dragzine
Drag Racing
chevyhardcore
Classic Chevy Magazine

Street Muscle - The Ultimate Muscle Car Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • fordmuscle Classic Ford Performance
  • dragzine Drag Racing
  • chevyhardcore Classic Chevy Magazine

Street Muscle - The Ultimate Muscle Car Magazine

streetmusclemag

Thank you for your subscription.

Thank you for your subscription.

Street Muscle - The Ultimate Muscle Car Magazine

Thank you for your subscription.

Thank you for your subscription.

Loading